woodcuts in bankrupt times

 A piece of steel 3mm thick 10.5cm long (8cm +2cm for the handle 0.5 for cut, grinding) 1.cut the metal with the dremmel, rinse wi...

 I don't know exactly what kind of wood is, beech wood I think, 3.5 cm diameter My first handle. I should cut the bottom to ha...

leather dabber 60mm. I found a piece of wood 6.5x5.5cm and with the rasp I tried to change its surface, from flat to curved I tried to...

I used steel 5mm and 8mm and brass 5mm I turned it slightly  to fit well in my hand (to turn the steel it must be lon...

you can do it easily using drill bits (n 1,2,3 3.5) and for handles old paint brushes 1.drill the handle, put the drill bit tightly, ...

               

  For the brayer  I used gasoline rubber hose (for motorcycles) 2 cm the outer diameter,1,4cm the internal, (if you can find big...

a tiny etching press using a pasta press 1.Secure the press with L and S (warped L) to a piece of wood (if it is cleaner than mine be...

     I used the half of a green folder. I  secured  it with a saucepen and I cut a piece like a half moon. With a small  ...